Search Results for ‘awd’

My AWD is creating far too much wheel skip/crabbing when going slow around corners and I wonder if the clutches in the AWD system (in transfer case) are the issue, or something else. It's like it wont loosen up. Four new all season tires AND changed the transfer case fluid, but the wheel...

I’m about to lower my car on some mono maxs and prob drop the front about a inch and a half and the rear .5 to even it out but any ideas will I need new camber bolts and a rear camber kit and adjustable control arms really need some help trying to do it the right way without blowing the bank

The real question is are there any after market shocks for awd q50s I’ve been looking for mine I have a 2015 awd q50 sport without dynamic suspension and I’m looking to drop it on rsr downs but I wanna replace the rear shocks before I do so, so there’s less of a shot of blowing out a shock bc...

Hi everyone, I was running into a bit of mixed information and I was wondering if I could get some help. I wanted to purchase some lowering springs for my 2017 Q50 Signature AWD and on the website it says the part number is N123D but everyone in the community says I should run N145D which was...

Hi after changing my lower o2 sensors which I'm pretty sure they were called downstream? Are the upper ones just called upstream? Do I have to stick with oem if I have my car tuned and also does anyone have a picture or diagram of how to get at these and where they are located? Thanks for the help!

Hi everyone, quick back story. I recentily installed some RSR Downs on my Q50 AWD and I started to notice the front was way lower than what I was expecting so I looked around and it seems most people say that happens when the springs are installed backwards, they all mention that the long...

UPDATE Turns out the two 19mm bolts holding the steering rack were loose as I mistakenly broke them loose when removing the bracket to change the starter. I remembered not being able to torque them tight again since there’s an unreachable nut on the top of the steering rack bolt and figured it...

I have a 2016 q50 awd premium. I am wondering if these vossen hf2 19 by 9 +31 offset will fit right. I'm still stock height I plan on lowering springs soon by about a inch The tires on them are 245/40/19

I currently own a 3.0t awd ss. I wanted to buy gemini invidia catback exhaust with ldp. I noticed it said rwd only. Is that true will it not fit the awd model? If that's the case what are some other good options for a similar setup. I'd like mufflers and resonators. Hard to find a setup I know...

I currently own a 2016 q50 premium 3.0t awd I am looking into buying some aftermarket rims. I have never purchased any rims before and have no clue what to look for/ what fits. I don't wanna ball out on my first set of rims but want something better then these ugly stocks. Let me know what...

Changed the tires yesterday from Continental to GYEAGLESPORTS RUN FLATS 245/45/18 from 235/45/18. 2018 3.0t AWD NO LIGHTS ON THE DASH My AWD and traction is not working, I will be taking it back to where I changed the tires, I checked all the cables running behind the wheels there is no...

So I have a 2018 Infiniti Q50 Luxe 3.0 AWD. I honestly do not know my offset but my tires are 225/50/18 and my wheels are 18x7.5. The wheel spec I’m not too sure on it. Tried looking everywhere for the actual Fitment spec. I also do not know my wheel offset :/ I am currently trying to but some...

Hello everybody! I'm owner of 2017 Infiniti Q50 3.0 AWD with 56k miles and I have issues with vibration in front part of my car. I almost every time feel it when I start drive from 20 till 30 mph. But sometimes it's gone and everything is good. I changed all brake disks, checked all engine...

Ok guys I am coming from the Z scene and planning on switching to a 2016 q50 sport with the awd. I am planning on buying it with intentions to mod and tune and all that. Where I live and coming from the Z scene the obvious tuner is Jon at Z1 from what I know it’s a rwd dyno and I’m not 100%...

Can I use the larger Nissan oil filter (P/N:15208-9E01A) on my 15' Q50 AWD Premium? Or should i stick with the standard Nissan oil filter (P/N: 15208-65F0E)?

If you turn off the traction control will the AWD still function the same and redirect power or will it work like a regular AWD system?