Search Results for ‘q50 3.0t’

came off a 2018 Infiniti q50 3.0t AWD (AWD/RWD are the same exact fitment, I called them and asked myself) there is also a post somewhere in this forum about this :) also a plastic bag got melted to the y pipe (as shown in photo) but you can scrape it off if you want Fast intentions exhaust...

I recently installed valves in my car and does anybody know why my car be making a weird noise when my rpms are high? It sounds like a clown balloon instead of a whooshhh. Could it be the valves or vacuum?. The kit i got is CZP Turbosmart Vee Port Pro Blow Off Valve Kit - Infiniti Q50 Q60 3.0T...

Okay so this might sound dumb but I wanna get a tomei muffler kit (y pipe back) but I want a different Y pipe not the tomei one so I see the tomei piping is 3.5 and all y pipes I see are 2.5 1-does anyone know what Y pipe I could get with the tomei 3.5in exhaust and 2- what would I do about...

I have a 2016 q50 3.0 and I'm wondering if I get lower downpipes if it wont pass smog. Since it has 4 cats and the secondary cats are the ones replaced with downpipes would it still pass then? I currently have a different exhaust, and a jb4 on my car and I just had to disconnect the jb4 to pass...

2016 q50 red sport, check engine light on got code P2GA3 can’t find anything anywhere. Any ideas? No issues otherwise driving fine.

Hello everybody, I recently purchase an Ark Catback Exhaust for my car on ConceptzPerformance. My car is a 2019 Infiniti Q50S with the 3.0tt engine. My problem is that I bought the exhaust for the 3.7L version. But my question is… Is it worth the trouble in exchanging it? They basically the...

Hi guys, I have a weird problem with the transmission, wanted to ask for your opinion. On my way to work suddenly the gearbox stucked on 3rd gear, on 3rd gear the rpm goes up but there is no change to 4th gear. Also when I tried to move the gear to manual and upshift manually the monitor showed...

Here are my 2 Map3 logs on my JB4. The one with WOT is a 0-60 pull and the other is just driving normally with normal acceleration. I’m not sure what to look for in these logs, any help would be very much appreciated. Thanks

Does anything look unusual in my logs? I have already disconnected the JB4 I’ve also disconnected the battery to the car and yet my car is still lacking power when I step on the gas.

i was wondering if anyone has any input on a good Y pipe for a 2017 Infiniti Q50 3.0tt, I have a bms stage 1 and a muffler delete with aFe drop in filters. I herd a lot of good and bad about the Meghan racing Y pipe and same with the ISR. I’m not sure with what I wanna go with. Any and all input...

No longer needed and will be in original box. Unlinked and ready to install. Willing to ship or local pick up.

Hey everyone, have a Greddy EVOlution catback exhaust for the 3.0t Q50 for sale. I've had it on my car about a year, but no issues except normal wear and tear. I have FI lower dp's so will be switching to a FI catback, only reason for the change. Probably should have matched it up from the...

I just recently put Megan Racing lower downpipes, MBRP cat-back exhaust, and ams intakes on my 3.0t. Now looking into a heat exchanger and a tune. I was interested in the AMS EcuTek hows everyone experience with it. I heard you need a laptop will any laptop work? How complicated is it to get it...

I'm about to purchase 19" wheels for my q50 sport. I had a question about the offset needed for me to clear the big brake sport calipers. Would a 19x10 +20mm clear the brake caliper for this car or would I need to go up to +40 mm? Thanks for the help. Also, this will be a square setup with...

So let me start off by saying I ended up getting a pre-owned 2017 Q50 with 28k miles. (Pick it up Monday at dealership) Now this car looks fantastic and I love it especially coming from a 2018 Mazda 6. I am somewhat of a DIY mechanic. I can do a lot of maintenance on a car. But let me start...

Now before you judge, I was really needing some sound ASAP and didn’t want to wait for the delivery or pay a lot as of right now for an ark exhaust—so we went the cheap route with a muffler delete starting after the resonators with two and a quarter inch piping...enjoy :) YouTube link

I just picked up my 2021 yesterday, and I am not satisfied with the sound it makes; previously I did a muffler delete with two and a quarter inch piping (not cutting the resonators [See attached.]) I’m wondering if I should do the same. Any thoughts?

550$ shipped or cheaper depending on shipping

Hi does anyone know if the 3.7 VHR lower down pipes will fit the 3.0T VR30DDTT? Thank you in advance! New to the community! 🙏🙏🙏