Infiniti Q50 Forum banner

Factory reset in self diagnostic menu

6851 Views 15 Replies 12 Participants Last post by  damonb10
I reset DCU in self diagnostic menu to factory settings, I lost everything, upper screen with clock no arms, no radio, no navigation, no sensors, can't change drive mode. Bottom screen just few basic icons. I know is only Consult 3 plus and MultiAV reconfiguration can help but I don't know how? I got access to consult with interface, but still without success. Maybe any solutions. Dealerships have no idea what to do
1 - 16 of 16 Posts
You're not the first person here to do a factory reset and muck the DCU up. What bothers me is that your dealership doesn't know what to do. I have a manual reconfiguration procedure listed below but is it all inclusive? Are there any other procedures besides this one that have to be done to put things back the way they were? I don't know.



See less See more
2
  • Like
Reactions: 1
Thx I"ll try again but I think already do this
i have the same problem. did You managed to fix it?
Omg, I just did the same reset and lost so many functions. NAV, drive mode selection, audio...

For those who did this as well, what was the solution and how much did that cost?
I ran into the same exact issue. Brought it to the dealership and they were able to reconfigure the DCU for me within about 20-30 minutes.
I ran into the same exact issue. Brought it to the dealership and they were able to reconfigure the DCU for me within about 20-30 minutes.
How much money did it cost?
How much money did it cost?
If they were indeed able to do that so easily they probably charged only an hour of labor. Usually the minimum. About $140.00 in my neck of the woods. Cheap vs the alternative.
  • Like
Reactions: 1
I reset DCU in self diagnostic menu to factory settings, I lost everything, upper screen with clock no arms, no radio, no navigation, no sensors, can't change drive mode. Bottom screen just few basic icons. I know is only Consult 3 plus and MultiAV reconfiguration can help but I don't know how? I got access to consult with interface, but still without success. Maybe any solutions. Dealerships have no idea what to do
I reset DCU in self diagnostic menu to factory settings, I lost everything, upper screen with clock no arms, no radio, no navigation, no sensors, can't change drive mode. Bottom screen just few basic icons. I know is only Consult 3 plus and MultiAV reconfiguration can help but I don't know how? I got access to consult with interface, but still without success. Maybe any solutions. Dealerships have no idea what to do
The only thing that I know so far u have to change the top screen 📺 and that should do.
I ran into the same exact issue. Brought it to the dealership and they were able to reconfigure the DCU for me within about 20-30 minutes.
I have the same problem so dealer can fix ?
The only thing that I know so far u have to change the top screen 📺 and that should do.
Wrong! Software, not hardware. See #2...
  • Like
Reactions: 1
I have the same problem so dealer can fix ?
Yes, they should. Dealer has to reconfigure the system (see above)...
Ile pieniędzy to kosztowało?
[/CYTAT] Witam, gdzie ten serwis?
For those who can't read Polish:

How much money did it cost?
[/QUOTE] Hello, where is this site?
Why do people ask a forum of users how much reconfiguring the DCU costs? Just call the dealer and ask them...
1 - 16 of 16 Posts
Top