Infiniti Q50 Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
148 Posts
I would look into a coating, like OptiCoat, GTechniq C5, etc.

I put a layer of the GTechniq stuff on the wheels of my '11 G37, and I can STILL get the dust/dirt off them with just car wash soap/water and a Meguiars body brush. I dont drive the car a whole lot, so maybe it wouldnt last 3+ yrs on a daily driver, but I would say at least a year between applications wouldnt be unrealistic.

As far as "Hot" anything from Meguiars....be careful, not the safest of cleaners for you OR your wheels.
 

·
Registered
Joined
·
148 Posts
Have you tried opticoat on wheel yet? Does it help?

I had some opticoat left over and I am wondering if it works with brake dust. It is permanent and I don't want to ruin my wheels.
I havent, but only because at the time the Gtech stuff was cheaper.

Lots of detailing forums on the net have shown Opti works great on just about everything, including wheels. I wouldnt use it on glass (it will create glare) but I would feel comfortable using it on anything with clearcoat (like wheels) and plastics (like headlights, taillights, etc)

If you are really worried about it, try it on a small spot of the wheel. They key for OptiCoat application is in the prep work. The surface needs to be 100% absolutely clean of everything. Grease, dust, dirt, previous coatings, etc. Then polish it as perfect as you can get it, then clean it again to make sure any polish leftovers are gone. Then apply Opti.

One of the Optimum tech reps is all over detailing forums (his name is Chris), look for his posts and he'll have plenty of how-to and tips for you.
 

·
Registered
Joined
·
148 Posts
35 oz!!! its the "weaker" stuff (kinda looks like aqua blue/green color)

I actually dont use much wheel cleaner, read that the bottles themselves are pretty good (unfortunately they are the foaming type nozzles).

But Ill use it on our other vehicles....the wheels have no coatings so it will work in that application.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top