Video: How to drop your VR30 engine

Avedis53

BlaQBetty said:
For those who prefer a video on how to drop your motor. @Avedis53, I tried to add this to the sticky that has the instructions for this but it is closed to replies.

Which sticky are you referring to?

2018 Q50 Red Sport AWD - Graphite Shadow - Essential, Sensory, Performance, and ProACTIVE Packages - Continental DWS 06 255/40ZR19 - BMS JB4 w/BT Rev.3 Connect Kit, EWG wires & fuel wires- FI CBE w/resonated X-pipe & 14" mufflers - HKS resonated lower downpipes - Z1 Motorsports 2-Piece drilled and slotted brake rotors - Z1 SS brake lines - Infiniti Motorsports street pads - Stillen adj. rear anti-sway bar - SPL Pro rear ASB endlinks - Sprint Booster throttle controller - Mishimoto OCC - XPEL Ultimate Protective Paint Film - SunTek ceramic tint - Color-matched rear spoiler - ShiftKoncepts paddle shifter extenders - PrecisionLED light kit - PGONE sequential mirror turn signals - VLEDS backup lights - Tuxmats - StrongArm trunk lifts - Escort 360c radar detector w/Blendmount & MirrorTap - Vantrue N2 Pro dashcam - Dragy GPS Performance Meter

Reply

Save

Like

BlaQBetty

Discussion Starter · #3 · 14 d ago

There's this thread:

How to Replace Your Turbos in 212 Easy Steps TSB EM22-007A

Per DDNSpider's suggestion - attached is the official TSB Turbo(s) replacement procedures. Mods - Consider this for a "Sticky"? Attached and Linked https://static.nhtsa.gov/odi/tsbs/2022/MC-10229603-0001.pdf Hope you never have to use them!

www.infinitiq50.org

Or this thread:

How To: Replace turbos on the 3.0

This is my first "how to" thread so please bear with me! So before attempting to replace the turbos on your 3.0 Q50, you must make sure you have the proper Tools... if you're attempting a job like this I will just assume you have the basics (sockets, ratchets, wrenches) What you may not have...

www.infinitiq50.org

Installed: Racebox Ecutek Tuned ~ AMS/Infiniti HE ~ AMS Fender Tank ~ AMS/Infiniti Intakes ~ AMS LPFP ~ Z1 subframe collars ~ Z1 diff brace ~ Z1 transmission mount ~ Z1 2 piece rotors w/ EBC Red Stuff Pads (F&R) ~ ZeroGravity Lithium Battery ~ Tesla Mark III Screen ~ Factory Black Grille

Sitting in basement waiting for me to find time in life: FI Stage 2 interchiller, Pierburg CWA400 intercooler pump, Mishimoto intercoolers, Mishimoto coolant lines, Mishimoto oil catch can, AMS lower downpipes, AMS expansion tank, AMS flex fuel kit, AMS fuel filter kit, Second AMS fender tank to be modded for interchiller, Hotchkis front and rear sway bars, 90% of custom 3" true dual mandrel bent catback exhaust, smoked sequential mirror signals, z1 aluminum undershroud, AuCar mark 6 tesla screen, smoked front bumper sequence turn signals.
Backordered: Manley Rods

Reply

Save

Like

Avedis53

· #4 · 14 d ago

BlaQBetty said:
There's this thread:

How to Replace Your Turbos in 212 Easy Steps TSB EM22-007A

Per DDNSpider's suggestion - attached is the official TSB Turbo(s) replacement procedures. Mods - Consider this for a "Sticky"? Attached and Linked https://static.nhtsa.gov/odi/tsbs/2022/MC-10229603-0001.pdf Hope you never have to use them!

www.infinitiq50.org

Or this thread:

How To: Replace turbos on the 3.0

This is my first "how to" thread so please bear with me! So before attempting to replace the turbos on your 3.0 Q50, you must make sure you have the proper Tools... if you're attempting a job like this I will just assume you have the basics (sockets, ratchets, wrenches) What you may not have...

www.infinitiq50.org

That's my question, which thread best matches what is in the video?

2018 Q50 Red Sport AWD - Graphite Shadow - Essential, Sensory, Performance, and ProACTIVE Packages - Continental DWS 06 255/40ZR19 - BMS JB4 w/BT Rev.3 Connect Kit, EWG wires & fuel wires- FI CBE w/resonated X-pipe & 14" mufflers - HKS resonated lower downpipes - Z1 Motorsports 2-Piece drilled and slotted brake rotors - Z1 SS brake lines - Infiniti Motorsports street pads - Stillen adj. rear anti-sway bar - SPL Pro rear ASB endlinks - Sprint Booster throttle controller - Mishimoto OCC - XPEL Ultimate Protective Paint Film - SunTek ceramic tint - Color-matched rear spoiler - ShiftKoncepts paddle shifter extenders - PrecisionLED light kit - PGONE sequential mirror turn signals - VLEDS backup lights - Tuxmats - StrongArm trunk lifts - Escort 360c radar detector w/Blendmount & MirrorTap - Vantrue N2 Pro dashcam - Dragy GPS Performance Meter

Reply

Save

Like

BlaQBetty

Discussion Starter · #5 · 14 d ago

Oh. I don't know. Both? New sticky?

Installed: Racebox Ecutek Tuned ~ AMS/Infiniti HE ~ AMS Fender Tank ~ AMS/Infiniti Intakes ~ AMS LPFP ~ Z1 subframe collars ~ Z1 diff brace ~ Z1 transmission mount ~ Z1 2 piece rotors w/ EBC Red Stuff Pads (F&R) ~ ZeroGravity Lithium Battery ~ Tesla Mark III Screen ~ Factory Black Grille

Sitting in basement waiting for me to find time in life: FI Stage 2 interchiller, Pierburg CWA400 intercooler pump, Mishimoto intercoolers, Mishimoto coolant lines, Mishimoto oil catch can, AMS lower downpipes, AMS expansion tank, AMS flex fuel kit, AMS fuel filter kit, Second AMS fender tank to be modded for interchiller, Hotchkis front and rear sway bars, 90% of custom 3" true dual mandrel bent catback exhaust, smoked sequential mirror signals, z1 aluminum undershroud, AuCar mark 6 tesla screen, smoked front bumper sequence turn signals.
Backordered: Manley Rods

Reply

Save

Like

Avedis53

· #6 · 14 d ago

BlaQBetty said:
Oh. I don't know. Both? New sticky?

One or the other. You look into it and tell me which thread the video best mimics. I've got too many irons in the fire ATM.

2018 Q50 Red Sport AWD - Graphite Shadow - Essential, Sensory, Performance, and ProACTIVE Packages - Continental DWS 06 255/40ZR19 - BMS JB4 w/BT Rev.3 Connect Kit, EWG wires & fuel wires- FI CBE w/resonated X-pipe & 14" mufflers - HKS resonated lower downpipes - Z1 Motorsports 2-Piece drilled and slotted brake rotors - Z1 SS brake lines - Infiniti Motorsports street pads - Stillen adj. rear anti-sway bar - SPL Pro rear ASB endlinks - Sprint Booster throttle controller - Mishimoto OCC - XPEL Ultimate Protective Paint Film - SunTek ceramic tint - Color-matched rear spoiler - ShiftKoncepts paddle shifter extenders - PrecisionLED light kit - PGONE sequential mirror turn signals - VLEDS backup lights - Tuxmats - StrongArm trunk lifts - Escort 360c radar detector w/Blendmount & MirrorTap - Vantrue N2 Pro dashcam - Dragy GPS Performance Meter

Reply

Save

Like

Reactions: 1

BlaQBetty

Discussion Starter · #7 · 14 d ago

I vote for new sticky. If that doesn't work, I vote for the second one I posted previously. But if someone has a strong opinion otherwise, I defer to their judgement.

Installed: Racebox Ecutek Tuned ~ AMS/Infiniti HE ~ AMS Fender Tank ~ AMS/Infiniti Intakes ~ AMS LPFP ~ Z1 subframe collars ~ Z1 diff brace ~ Z1 transmission mount ~ Z1 2 piece rotors w/ EBC Red Stuff Pads (F&R) ~ ZeroGravity Lithium Battery ~ Tesla Mark III Screen ~ Factory Black Grille

Sitting in basement waiting for me to find time in life: FI Stage 2 interchiller, Pierburg CWA400 intercooler pump, Mishimoto intercoolers, Mishimoto coolant lines, Mishimoto oil catch can, AMS lower downpipes, AMS expansion tank, AMS flex fuel kit, AMS fuel filter kit, Second AMS fender tank to be modded for interchiller, Hotchkis front and rear sway bars, 90% of custom 3" true dual mandrel bent catback exhaust, smoked sequential mirror signals, z1 aluminum undershroud, AuCar mark 6 tesla screen, smoked front bumper sequence turn signals.
Backordered: Manley Rods

Reply

Save

Like

Top Contributors this Month